Industrial Series
Laminator HD-25
"Workhorse"
Laminator HD-25
Most
dependable..productive...trouble free..easy to
use...versatile...easy to maintain
These
are the kinds of terms Ledco owners use to describe their Heavy
Duty 25. There are Ledco machines 15 years old
...and older that are still going strong. There are
owners with several machines that have produced for years with
no maintenance other than oiling, adjusting and replacing
"normal wear" parts. We hear from
appreciative owners every week.
They say a Ledco HD-25 absorbs tremendous usage with amazing
durability, produces high-quality lamination and does jobs it
isn't supposed to do such as single-sided laminating.
Years ago, a Ledco distributor coined the name
"Workhorse" for the HD-25. Although never
adopted by Ledco, many owners still use the name
"Workhorse". That's because the word so aptly
describes this extraordinarily reliable heavy-duty
laminator. As more than one owner has said, "It
just keeps going."
Who can use a Workhorse? Any graphics or finishing
shop that needs a true commercial machine...trade laminators,
photo finishers, printers, government or school support centers,
binders & finishers, military installations, hospitials,
reprographers, map makers, publishers and manufacturers.
The HD-25 machine is unique because of its toughness and because
no other manufacturer offers a low cost autofeeder designed
specifically for a 25-inch commercial machine. With the
addition of a third-party autocutter, a rugged and fully
automatic laminating system can be assembled for many thousands
of dollars less than other commercial auto-system on the market.
Here are the features
that contribute to making a machine people naturally call a
Workhorse...
|
Intelligent
Heat Controllers - display both the set temperature and
the actual temperature. the microprocessor in the
control quickly learns to anticipate the heat demand of
each job and keeps the actual temperature within a few
degrees of the set temperature.
|
- Laminating
and Pull Rollers - are covered with quality silicone
rubber for superior release quality, higher
lamination quality and easier cleaning. The
laminating rollers and pull rollers are
interchangeable.
- Removable
Heat Shoes - are teflon coated to reduce film
abrasion. They are easily unplugged and
removed to clean or replace the laminating rollers.
- Built-in
Retractable Slitters - save an enormous amount of
cutting time by trimming away side scrap during the
lamination process. The two heads can be
adjusted independently with great precision.
- Dual
Tension Knobs - (clutches) for each supply roll
mandrel are easy to use and provide as little or as
much tension as needed to keep work wrinkle-free.
- Forced Air
Cooling - is essential when running thicker films,
because the lamination needs to be cooled to get
good results.
- Easy
Access Controls - are conveniently located and
grouped for effective operation.
- A Safety
Guard - is built into the feed tray to help insure
it will always be in place when laminating.
- Both upper
and Lower Rollers Are Driven - to minimize the
wrinkling or curling that can occur when only one
roller is driven
- Standard
Precision Feed Tray - has both left and right side
guides and can be replaced with the power feed tray
in seconds.
- Made In
U.S.A. - All Machines are Made in The U.S.A.
|
Optional Equipment...
Power Feed
Tray - Designed exclusively for the Workhorse laminator, this
autofeeder has received good reviews for its effectiveness and
easy setup. Automation of feeding is the first step toward
automated lines and lower production costs.
Risers and Extensions - Risers raise machine off work surface,
allowing longer supply roll brackets (extensions) to handle
larger diameter rolls of film.
Extended Supply Roll Brackets - Allow for larger supply roll
diameters. Used without risers when a machine is on a
stand.
Stand - Built of heavy duty tubular steel. Designed
to place unit at optimum feeding height, and to provide a secure
base.
Upper Fan Assembly - When running thicker films additional
cooling capacity permits work to be run at a higher speed.
Scrap Rewind - Removes liner material from pressure sensitive
and dry resist films.
Footage Counter - For accurate measurement of film usage.
Additional Slitter Heads - For multiple-up work. |
|